Computer cannot recognise connected HX3 Expander module.

Rund um den Hammond-Clone HOAX3

Moderator: happyfreddy

jon54
Beiträge: 7
Registriert: 14. Jan 2019, 06:05
Kontaktdaten:

Computer cannot recognise connected HX3 Expander module.

Beitrag von jon54 » 10. Feb 2019, 23:20

Hi - I'm wanting to edit CCs on my Hx3 module (firmware 4.25) but the Remote app is not detecting the module.
Can any one see where I'm going wrong?

Drivers are installed
Drivers installed.jpg
Module powered up and connected to computer using an M-Audio MIDI to USB device. I have both in/out MIDI plugs connected to the module.

Launch HX3.4 Remote app, but HX3 module not detected
HX3 Remote app fail scrSht.jpg
I have noticed that if I use the data entry knob or buttons on the module that the MIDI data LEDs on the M-Audio do not flicker!

m_g
Beiträge: 243
Registriert: 25. Sep 2013, 16:48
Kontaktdaten:

Re: Computer cannot recognise connected HX3 Expander module.

Beitrag von m_g » 11. Feb 2019, 10:13

You have to connect your HX3 directly via USB
----------------------------------------------
Live: HX3-19"-Expander+KM Controller, Korg Grandstage 73, MS KP500SN, Leslie 760mod
Studio: Hammond XK5+XLK5, Sequential Prophet 6, Yamaha Montage 7, Moog Subseq 37, Vent1....

happyfreddy
Beiträge: 1294
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: Computer cannot recognise connected HX3 Expander module.

Beitrag von happyfreddy » 11. Feb 2019, 13:13

.... and don´t forget to include Your name and serial numbers / licences in marked fields !!!
Hammond H 112 auf Säulen
Wersi Spectra auf Chromsäulen (+ HX 3 im Bau)
Wersi Spectra im Prisma Gehäuse
Leslie 770
HX 3 B 3 look (mk 4 )
HX 2 auf Chromsäulen (mk 1)
HX 1 Labormuster von 2010 mit Röhrenvorstufe
WERSI HELIOS W2TV spezial + HX 3.5

jon54
Beiträge: 7
Registriert: 14. Jan 2019, 06:05
Kontaktdaten:

Re: Computer cannot recognise connected HX3 Expander module.

Beitrag von jon54 » 11. Feb 2019, 21:25

m_g hat geschrieben:You have to connect your HX3 directly via USB
Ohhhh... I completely forgot that there is a mini USB socket on the module aaaannnnnd...BINGO!!... The Remote app sees the connect module.

Thank you so much :)

jon54
Beiträge: 7
Registriert: 14. Jan 2019, 06:05
Kontaktdaten:

Re: Computer cannot recognise connected HX3 Expander module.

Beitrag von jon54 » 11. Feb 2019, 21:27

happyfreddy hat geschrieben:.... and don´t forget to include Your name and serial numbers / licences in marked fields !!!
These were all imported automatically when the remote app connected with the module. All OK :-)

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste