Keyboardpartner-Forum

Hi!

Can be use for HX 3.5 midi expander a 12volt 1.5 A positive inside power supply?

Thank you!

For the normal Expander use this item

https://shop.keyboardpartner.de/p/hx3-steckernetzteil

This item is normal when HX 3 MIDI Expander delivered INCLUDED

as told in description

Beschreibung
Steckernetzteil 9V / 600mA DC passend für HX3-Platine und HX3-Expander. DC-Stecker 5,5/2,1mm. Weitbereichs-Eingang 100 bis 240V AC, Eurostecker.

Bitte beachten: Auf der HX3-Platine darf JP12 nicht gesteckt sein. HX3 Expander werden serienmäßig mit Steckernetzteil geliefert.

The item is for use at 100 - 240V AC Input Voltage.

on the back panel of the unit above the power inlet it is mentioned the voltage from 9 to 12...I have the original one, but in case of any I would like to have a spare one. I have one with 12 volt and 1,5A, that is why I asked if it is usable or not for the HX 3.5

In any case You first had to regard the polarity of the DC Voltage in jack

The needed current is 600mA ( = 0,6 A ) , so why using such a big
a power supply with 1,5 A ????

using other parts as delivered is Your own risk