Control Leslie

Rund um die "Clonewheels" HX3.1 bis HX3.4 (mk4) und HOAX 2

Moderator: happyfreddy

miles
Beiträge: 6
Registriert: 30. Okt 2021, 21:13
Kontaktdaten:

Control Leslie

Beitrag von miles »

I want to control the fast and slow leslie effect using the sustain pedal connected to the FootSwitch input.
I need to shut down to release a fast ef. Press again to release the slow ef.
Can it be set in the editor :?:
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: Control Leslie

Beitrag von happyfreddy »

You have on back side of the Expander a stereo Jack for switching
the Leslie Effekt Slow - Fast - Stop

The shaft of Jack is GROUND
The ring switches against Ground RUN and STOP Modus
The Pin switches against Ground FAST - SLOW modus

The Fast - Slow Modus only happens when the RUN Modus is ON

In either position of fast - slow this modus will stop when the RUN Modus is OFF

So in Your case You only have to plug in a SWITCH with PIN and GROUND connection
The RUN Pin must then always being shortened to Ground
miles
Beiträge: 6
Registriert: 30. Okt 2021, 21:13
Kontaktdaten:

Re: Control Leslie

Beitrag von miles »

happyfreddy thank you for the advice
Antworten

Wer ist online?

Mitglieder in diesem Forum: Bing [Bot] und 32 Gäste