Crumar D9X drawbar controller
Verfasst: 6. Nov 2021, 13:00
For those who miss the HX3 drawbar controller, the Crumar D9X is a good alternative. See
https://www.musicstore.com/en_US/USD/Cr ... 005269-000
To connect the Crumar D9X to the HX3.5 you need a cable with 3.5mm stereo jack on one side and the usual 5pin DIN plug on the other side, which Crumar does not include. Such cables are commercially available, however most of the cheap cables e.g. from Amazon are not wired correctly. The required wiring (Crumar calls it "Type 2") is this:
DIN plug pin 2 (ground) to sleeve
DIN plug pin 4 to tip
DIN plug pin 5 to ring
The matching HX3.5 CC set can be found here: http://updates.keyboardpartner.de/Files ... ontributed
https://www.musicstore.com/en_US/USD/Cr ... 005269-000
To connect the Crumar D9X to the HX3.5 you need a cable with 3.5mm stereo jack on one side and the usual 5pin DIN plug on the other side, which Crumar does not include. Such cables are commercially available, however most of the cheap cables e.g. from Amazon are not wired correctly. The required wiring (Crumar calls it "Type 2") is this:
DIN plug pin 2 (ground) to sleeve
DIN plug pin 4 to tip
DIN plug pin 5 to ring
The matching HX3.5 CC set can be found here: http://updates.keyboardpartner.de/Files ... ontributed