Crumar D9X drawbar controller

[Christian]

For those who miss the HX3 drawbar controller, the Crumar D9X is a good alternative. See
https://www.musicstore.com/en_US/USD/Cr ... 005269-000

To connect the Crumar D9X to the HX3.5 you need a cable with 3.5mm stereo jack on one side and the usual 5pin DIN plug on the other side, which Crumar does not include. Such cables are commercially available, however most of the cheap cables e.g. from Amazon are not wired correctly. The required wiring (Crumar calls it "Type 2") is this:

DIN plug pin 2 (ground) to sleeve

DIN plug pin 4 to tip

DIN plug pin 5 to ring

The matching HX3.5 CC set can be found here: http://updates.keyboardpartner.de/Files ... ontributed

[Christian]

A cable with 3.5mm stereo plug, not jack of course. Sorry for my translation error.