Keyboardpartner-Forum

Hi
I will test next few days . Not sure but maybe a little bug.

It appeared that even after storing/saving an 'audio out' nothing changed for quite a while. However, I discovered that if I pressed any of the presets on the XK-3 after I'd selected a new 'audio out' the change was effected immediately. Don't know why this should be the case but it's an easy 'fix'. This is why I thought it was taking a long time to change to a new setting - it wasn't changing until it saw a preset key press from the XK-3.

Paul

When You change some settings You must STORE them otherwise the new information will lost.
The other problem only Carsten can answer. I´ll inform him

Ok, it seems that the bass drawbars are resetting themselves to zero. If I use the menu panel knob to set a level on the pedal drawbars, the sound [i]is[/i] output to the outer jack. If I touch the drawbars themselves they immediately return to zero. This is on an XK-3 which uses NRPN midi signals. Since all the other drawbars are working normally I guess it's a problem of midi translation for the pedal drawbars only.

Carston, it would be nice to have a fix for this - any idea how to solve it?

I also noticed that if I change the audio output settings they don't react immediately, even after pushing the data 'save' knob. Is this normal?

Thanks

Hi everyone,

I'm still setting up my new HX3 and with the audio settings on organ/ped I get no sound on the left (outer) pedal jack. I tried all combinations but no success. The inner jack is sending the G-G organ signal ok. The bass pedals are sending midi ok (channel 3 via my XK-3) and on some settings I hear the pedals really, really quietly. If I turn on 'pedals to lower' I also hear the pedals really quietly. The pedal drawbars appear to be functioning ok.If I set the Left (outer) jack to the same organ/ped setting I get no sound at all (no G-G).

Any ideas that might help me solve this?

Thanks