von bovist » 14. Jan 2021, 10:23
Hello Joost,
we apologize for the inconvenience. Running the update_script.ini as a config script will result in an endless loop, as the update script is called by itself.
On custom made organs (non-keyboardpartner products like DIY, Uhl or MAG) a custumized INI file may be run. We supply INI files for our MIDI/Drawbar Expanders as well as standard Fatar-equipped organs with 2 or 4 drawbar sets, MAG and Uhl organs, but as we cannot determine your particular configuration, some manual adjustments may be necessary. If in doubt, do NOT run any config script, check parameters manually instead.
If anything went wrong, it may help to re-install the update parts manually with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable".
- Connect to organ by clicking "Connect"
- Are "Organ Licence" and "Extended Licence" (if purchased) lit up "OK"?
- Check board information: are "Board Summary" entries correct?
- FPGA:11012021, FW: 5.630, ScanCore: 5x:32, DSP Version: x1.23
- Does Scan Driver match your configuration (Fatar, MIDI or Scan61)?
Update manually all parts that differ in version number or if scan driver type (Fatar, MIDI or Scan61) is not correct. To prevent corrupted EEPROM (non-volatile configuration data), always update EEPROM after a crash.
Automatic update will not install the new Piano soundbank by itself. It must be uploaded with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable -> DSP (byDreamDFU)". the process is similar to DSP firmware update.
On Jan. 13th I made a small change to Editor/Updater (will have increased reliability) and Fatar scan driver (BASS25 was not working). Please download ZIP file again if downloaded before Jan 13th, 21:00.
Hello Joost,
we apologize for the inconvenience. Running the update_script.ini as a config script will result in an endless loop, as the update script is called by itself.
On custom made organs (non-keyboardpartner products like DIY, Uhl or MAG) a custumized INI file may be run. We supply INI files for our MIDI/Drawbar Expanders as well as standard Fatar-equipped organs with 2 or 4 drawbar sets, MAG and Uhl organs, but as we cannot determine your particular configuration, some manual adjustments may be necessary. If in doubt, do NOT run any config script, check parameters manually instead.
If anything went wrong, it may help to re-install the update parts manually with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable".
[list]
[*]Connect to organ by clicking "Connect"
[*] Are "Organ Licence" and "Extended Licence" (if purchased) lit up "OK"?
[*]Check board information: are "Board Summary" entries correct?
[*] FPGA:11012021, FW: 5.630, ScanCore: 5x:32, DSP Version: x1.23
[*] Does Scan Driver match your configuration (Fatar, MIDI or Scan61)?
[/list]
Update manually all parts that differ in version number or if scan driver type (Fatar, MIDI or Scan61) is not correct. To prevent corrupted EEPROM (non-volatile configuration data), always update EEPROM after a crash.
Automatic update will not install the new Piano soundbank by itself. It must be uploaded with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable -> DSP (byDreamDFU)". the process is similar to DSP firmware update.
On Jan. 13th I made a small change to Editor/Updater (will have increased reliability) and Fatar scan driver (BASS25 was not working). Please download ZIP file again if downloaded before Jan 13th, 21:00.