Keyboardpartner-Forum

von **hoaxel** » 2. Mär 2016, 19:18

OK danke euch beiden, Axel

von **happyfreddy** » 2. Mär 2016, 18:54

hoaxel hat geschrieben:und meine Frage? zu blöd, um sie zu beantworten? ist doch für alle midi user wichtig

Ich hatte es beantwortet :
übersetzt : nicht alle Daten werden gesendet ,

Was möglich ist kann per Software eingestellt werden und ist dort nachzulesen.
CC Sets werden jedenfalls gesendet wie wir neulich herausgefunden haben.

von **happynotes** » 2. Mär 2016, 17:57

Hi happyfreddy, I still must connect the extension board, I only find info on http://wiki.keyboardpartner.de/index.ph ... stallation mentioning the 26 pin connector, I have the cable, but there seems to be no 26 pin socket on the hx3 board? How does this work or where can I find more info? I would be able to test the expansion board's midi out..

thank yo,

best regards,

Alain

von **happynotes** » 2. Mär 2016, 17:40

hi hoaxel , maybe you must check midi swell cc? (not sure... have not been able to try myself yet..)

grüsse,

Alain

von **hoaxel** » 2. Mär 2016, 17:08

und meine Frage? zu blöd, um sie zu beantworten? ist doch für alle midi user wichtig

von **happyfreddy** » 2. Mär 2016, 16:51

Hi,
Perhaps there something has changed since a extension board can be plugged.
Extensionboard contains a third MIDI Jack used as MIDI OUT too.
The configuration what appears on which MIDI OUT can be set in different way.
In moment Carsten is busy with moving his home/office adress so I can´t ask him
Please be so kind and wait till next week or so and he is ready again.

von **happynotes** » 2. Mär 2016, 14:24

Hi happyfreddy, I found the jumpers behind the usb print, will not change 'em, but I've tried all midi settings, no midi note on-off data (or other data) is being sent through midi out...? Any specific setting I might have overlooked?

I also notice that the lower keyboard is slightly softer than upper, but did not see a seperate upper-lower volume setting or balance ?

thank you,

Alain

von **happyfreddy** » 2. Mär 2016, 13:45

Hi,
The socket is there !
It´s under the red USB socket direct left side the two MIDI Jacks.
On the socket are two jumpers set. Let them in their position = MIDI OUT funtion for the MIDI OUT Jack.

Changing the jumpers will set the MIDI OUT Jack as SECOND MIDI IN JACK

What appears on MIDI OUT besides FATAR Keyboard Data must be set via remote software
Not every data is possible to be sent

von **happynotes** » 2. Mär 2016, 12:41

Hi happyfreddy, I do not have a jumper-socket installed on my board... (above midi out socket)

regards,

Alain

von **hoaxel** » 2. Mär 2016, 10:53

da häng ich gleich noch mal meine nicht beantwortete Frage an, ob man bei midi out den Schweller mitsenden kann, also die Lautstärke. geht bei mir nämlich nicht, immer max Pegel

Keyboardpartner-Forum

midi out to external device (piano module-computer...)

Antwort erstellen

Ansicht erweitern Die letzten Beiträge des Themas: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)

Re: midi out to external device (piano module-computer...)