von moser » 8. Mär 2015, 16:12
Hi Paul,
I read your conversion, because I use the HX3 Expander Firmware 3.721 with a Hammond XK3-c(2 Manuals)System. I like the Sound of the HX3 very much, but I have a Little problem with the Sound of the Chorus, especially with Chorus 3 in the upper two octaves. It`s crying in a bit strange matter, so I hope you are satisfied with your paramters, as you can compare with your B3.
Would my I ask you t you be so kind and tell me your parameters for Chorus/vibr 1, 2 and 3 and the Chorus dry Mix , Chorus vib Mix
I use following Parameters:
Vib 1
LC Age 46
Freq Mod 75
Vib 2
LC Age 80
Freq Mod 110
Vib3
LC Age 120
Freq Mod 160
Chorus Dry Mix 170
Chorus Vib Mix 100
would be very nice.
I used the HX3 for a short while with the return and send in the XK3c, Output in HX3 with amp/Pedal.
But I never heard teh the same Sound in comparison with a direct out from HX3 to my Leslie ( I use a 3300). All the parameters in the XK3c I tryed (T,B,M,t) . My experience: some times more or less a bit better or not. But the real clear Sound is only what I wrote above. I intend in buying a 145 vintage Leslie with a extern preamp, so there a 2 line-in-connectors. I hope this will be perfect.
Hope to hear from you
Wolfgang
Hi Paul,
I read your conversion, because I use the HX3 Expander Firmware 3.721 with a Hammond XK3-c(2 Manuals)System. I like the Sound of the HX3 very much, but I have a Little problem with the Sound of the Chorus, especially with Chorus 3 in the upper two octaves. It`s crying in a bit strange matter, so I hope you are satisfied with your paramters, as you can compare with your B3.
Would my I ask you t you be so kind and tell me your parameters for Chorus/vibr 1, 2 and 3 and the Chorus dry Mix , Chorus vib Mix
I use following Parameters:
Vib 1
LC Age 46
Freq Mod 75
Vib 2
LC Age 80
Freq Mod 110
Vib3
LC Age 120
Freq Mod 160
Chorus Dry Mix 170
Chorus Vib Mix 100
would be very nice.
I used the HX3 for a short while with the return and send in the XK3c, Output in HX3 with amp/Pedal.
But I never heard teh the same Sound in comparison with a direct out from HX3 to my Leslie ( I use a 3300). All the parameters in the XK3c I tryed (T,B,M,t) . My experience: some times more or less a bit better or not. But the real clear Sound is only what I wrote above. I intend in buying a 145 vintage Leslie with a extern preamp, so there a 2 line-in-connectors. I hope this will be perfect.
Hope to hear from you
Wolfgang