Preview: Firmware 4.1 BETA

Rund um die "Clonewheels" HX3.1 bis HX3.4 (mk4) und HOAX 2

Moderator: happyfreddy

bovist
Site Admin
Beiträge: 475
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Preview: Firmware 4.1 BETA

Beitrag von bovist »

Die neue Firmware 4.1 wird es bald für die komplette HX3-Familie geben. Hier die neuen Features in Kürze:
  • Überarbeitetes Scanner-Vibrato mit neuer Parametrierung, getrennt für Chorus und Vibrato; es vereint die Vorzüge von altem Chorus und neuem Vibrato - dies dürfte nun keine Wünsche mehr offenlassen! Hier die Parameter im Einzelnen:
    • Scanner Gears: Vibrato-Modulationsfrequenz
    • Scanner Leak: Parasitäres Durchsingen des unmodulierten Signals bei V1/V2/V3
    • VibCh AmplMod: Modulation der oberen Grenzfrequenz der LC-Linebox
    • VibCh Preemphasis: Höhenanhebung des Vibrato-Chorus-Kanals
    • VibCh Reflect: Reflexionen auf der LC-Linebox durch Fehlanpassung bzw. gealterte Kondensatoren, fügt ein dezentes "Schwummern" hinzu
    • VibCh Response: obere Grenzfrequenz der LC-Linebox 0.. 8 kHz
    • Ch LineboxLvl: Anteil Vibrato bei Chorus
    • Ch BypassLvl: Anteil unmoduliertes Signal bei Chorus
    • V1 ModAmount: Modulationstiefe bei V1
    • ...
    • C3 ModAmount: Modulationstiefe bei C3
  • Bessere Nachbildung des Tastenklicks bei sehr sanftem Anschlag (in Arbeit)
  • Einzel-Einstellbarkeit der Busbar-Pegel für individuelle Anpassung der Fußlagen (derzeit nur mit HX3 Remote)
Wer sich als Beta-Tester betätigen will, findet die Vorab-Version in unserem Github im Verzeichnis BETA.


Firmware 4.1 has a new chorus/vibrato routing, adding new parameters in menu and HX3 Remote. Only use with FPGA #25092016. New params are:
  • Scanner Gears: Vibrato modulation frequency
  • Scanner Leak: Leakage of unmodulated signal on V1/V2/V3
  • VibCh AmplMod: Modulation of upper frequency limit of LC linebox
  • VibCh Preemphasis: Treble enhancement on Vib/Ch
  • VibCh Reflect: Reflections on LC linebox due to aged capacitors
  • VibCh Response: upper frequency limit of LC linebox
  • Ch LineboxLvl: Vibrato mix on Chorus C1/C2/C3
  • Ch BypassLvl: Dry mix on Chorus C1/C2/C3
  • V1 ModAmount: Modulation depth on V1
  • ...
  • C3 ModAmount: Modulation depth on C3
  • Adjustable busbar levels for each drawbar (by HX3 Remote only)
Beta testers will find the new firmware in our github repository.
clp560
Beiträge: 149
Registriert: 21. Jul 2014, 15:37
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von clp560 »

I've downloaded and installed the new Firmware without problems, and input most of my previous settings so I'm starting from more or less the same point soundwise. Plenty of new parameters to look at! So far the sound of the chorus/vib 'out of the box' is great - the only change I've done is to the scanner frequency, which I moved to 48 as I prefer the slightly faster chorus (as per my B3). When I figure out how all the other adjustments interact I'll see if there are any interesting improvements to be had, though I think it unlikely - I might be needing the default.csv if it all goes wrong :-)

Paul
clp560
Beiträge: 149
Registriert: 21. Jul 2014, 15:37
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von clp560 »

I've had some time to play around with the HX3 editing with my B3 connected in order to make some comparisons. I now have the Chorus/Vib virtually identical and it sounds great. I've attached the csv file for anyone to make comparisons or try out by uploading it to the HX3. The Midi CC set will need setting to something else if you aren't using the Hammond XK set. I made a few alterations to the different chorus settings and I revised my scanner gearing speed to 67 since I had the B3 running to compare directly. The other adjustment that helped to match my B3 was to lower the Busbar Level 16 to 195. I'm sure this will vary from model to model but it's great to have the possibility to change it. The amplification used, and the audio outputs from the HX3, will also affect the final sound so this is a setting that works for me (I play through a Leslie 147 with a modified tube amp - an updated Leslie Type 100).

So far 4.1 Beta is working without problems and the extra editing possibilities are really helping to fine tune my HX3/XK3 combo. Thanks Carsten.

Paul
Dateianhänge
hx3_organ_defaults_Flushie 2-10-16.csv.zip
(2.07 KiB) 164-mal heruntergeladen
Zuletzt geändert von clp560 am 5. Okt 2016, 16:36, insgesamt 1-mal geändert.
dg-keys
Beiträge: 8
Registriert: 1. Jun 2016, 19:21
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von dg-keys »

Hallo zusammen,

ich konnte nicht länger warten und habe ebenfalls das Beta auf meine B3 (HX3) gezogen:

Lieber Carsten; HÖLLE!
Ganz ausgezeichnet das Scanner Vibr C3.
Das singt richtig jetzt wie meine alte A100.
Version läuft wunderbar stabil.
Genial!

Du bist der beste.
LG
Dan
RamonCliment
Beiträge: 118
Registriert: 14. Apr 2015, 19:48
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von RamonCliment »

Hallo an Alle !

Es klappt wunderbar sowohl mit mein HX3 Plexi-Expander als auch mein P-2 Mag Organ.
Klasse ! Dankeschön Carsten
Grüsse, Ramon.
Mojo
Beiträge: 10
Registriert: 27. Jan 2015, 09:39
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von Mojo »

Hallo Carsten,

ein Vorschlag für die neue Version: Könnte man den Menupunkt "Save Tabs to Pre" so fixieren, dass er auf "on" bleibt beim Ausschalten? Ich muss nach jedem Neustart neu von Hand auf "on" schalten, um wieder die Perc-Einstellungen auf den Presets zu haben.

Und ich würde gern die Presets 9-16 ebenfalls für das Obermanual nutzen, da ich kein UM einsetze.

Geht das? Wäre super!

Vielen Dank Mojo
ManneD
Beiträge: 67
Registriert: 23. Aug 2013, 11:23
Wohnort: Oberasbach
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von ManneD »

Ich habe auch die 4.1 auf meine MAG-UC1 gespielt. V/C läßt jetzt kaum mehr Wünsche offen ! Klasse Carsten!
Eines ist mir noch aufgefallen: Durch die Parameter für den Drive Regler (A028...) lassen weniger Verzerrung zu, als in den früheren Versionen. Ich muß den Drive Regler und die Parameter 459 und 460 voll aufdrehen um eine minimale Verzerrung zu erreichen. Ich glaube, dass war schon einmal anderes. Vielleicht könnte man da nochmal dran schauen.

Ansonsten wirkt die Beta sehr ausgereift und klingt saugut !

Manne
Mitch Towne
Beiträge: 8
Registriert: 11. Apr 2015, 17:54
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von Mitch Towne »

Could someone please post the default settings of the new parameters?

Thanks!

Mitch
TKN
Beiträge: 7
Registriert: 20. Dez 2015, 09:51
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von TKN »

#,Description,Value,Type,Max
401,"UpperDB 16 ",120,TrackBar,127
402,"UpperDB 5 1/3",127,TrackBar,127
403,"UpperDB 8 ",127,TrackBar,127
404,"UpperDB 4 ",127,TrackBar,127
405,"UpperDB 2 2/3",104,TrackBar,127
406,"UpperDB 2 ",93,TrackBar,127
407,"UpperDB 1 3/5",98,TrackBar,127
408,"UpperDB 1 1/3",107,TrackBar,127
409,"UpperDB 1 ",109,TrackBar,127
410,"Vibrato Knob",5,VibKnob,5
413,"Upper Preset ",2,None,15
414,"Lower Preset ",0,None,15
416,"LowerDB 16 ",0,TrackBar,127
417,"LowerDB 5 1/3",0,TrackBar,127
418,"LowerDB 8 ",127,TrackBar,127
419,"LowerDB 4 ",80,TrackBar,127
420,"LowerDB 2 2/3",0,TrackBar,127
421,"LowerDB 2 ",0,TrackBar,127
422,"LowerDB 1 3/5",0,TrackBar,127
423,"LowerDB 1 1/3",0,TrackBar,127
424,"LowerDB 1 ",0,TrackBar,127
425,"PedalDB 16 ",0,TrackBar,127
426,"PedalDB 5 1/3",0,TrackBar,127
427,"PedalDB 8 ",127,TrackBar,127
428,"Pedal Sustain",0,TrackBar,100
431,"Tube Amp Gain",100,TrackBar,250
490,"Master Volume",250,TrackBar,250
433,"MIDI Channel ",0,TrackBar,9
434,"MIDI Option ",0,MidiOpt,3
435,"MIDI CC Set ",0,MidiCC,13
486,"MIDI Swell CC",11,None,127
487,"MIDI Volume CC",7,None,127
436,"Split Mode",0,SplitOpt,4
489,"Split Point",24,None,24
437,Transpose,0,None,13
438,"AudioJack Conf A",26,OutConfig,31
439,"AudioJack Conf B",24,OutConfig,31
440,"Scanner Gearing",62,TrackBar,100
441,"Scanner Leakage",16,TrackBar,100
442,"VibCh AmplMod",179,TrackBar,200
443,"VibCh PreEmphasis",129,TrackBar,200
444,"VibCh DelayLine Reflect",0,TrackBar,200
445,"VibCh Response",63,TrackBar,200
446,"Chorus Effect Mix",46,TrackBar,250
447,"Chorus Bypass Mix",180,TrackBar,250
493,"V1 Modulation",60,TrackBar,250
494,"C1 Modulation",60,TrackBar,250
495,"V2 Modulation",100,TrackBar,250
496,"C2 Modulation",100,TrackBar,250
497,"V3 Modulation",168,TrackBar,250
498,"C3 Modulation",175,TrackBar,250
448,"Perc Norm Level",180,TrackBar,250
449,"Perc Soft Level",140,TrackBar,200
450,"Perc Long Time",14,TrackBar,50
451,"Perc Short Time",40,TrackBar,70
452,"Perc DB Muted Level",120,TrackBar,250
453,"TG Flutter ",7,TrackBar,15
454,"TG Leakage ",2,Leakage,3
455,"TG Cap Set",1,CapSet,3
456,"No 1' with Perc On",0,Button,1
457,"Foldback 16' Mode",0,FoldbackMode,3
482,"AO28 Minimal Swell",7,TrackBar,25
458,"AO28 Tone Pot",30,TrackBar,100
459,"AO28 Swell TrimCap",50,TrackBar,100
460,"AO28 TriodeDistortion",20,TrackBar,50
461,"Contact Spring Flex",7,TrackBar,15
462,"Contact Spring Damping",9,TrackBar,15
463,"Reverb 1 Level",100,TrackBar,250
464,"Reverb 2 Level",140,TrackBar,250
465,"Reverb 3 Level",140,TrackBar,250
466,"Horn Slow Timer",17,TrackBar,50
467,"Rotor Slow Timer",14,TrackBar,50
468,"Horn Fast Timer",140,TrackBar,150
469,"Rotor Fast Timer",134,TrackBar,150
470,"Horn RampUp Time",0,TrackBar,25
471,"Rotor RampUp Time",10,TrackBar,25
472,"Horn RampDown Time",7,TrackBar,50
473,"Rotor RampDown Time",16,TrackBar,50
474,"Rotary Throb",175,TrackBar,250
475,"Rotary Spread",60,TrackBar,100
476,"Rotary Balance",100,TrackBar,200
477,"Scan Core (Board)",1,ScanBoard,7
478,"No Analog Inputs",255,Button,1
479,"ButtonMask Pins PL7",0,CheckBits,255
480,"ButtonMask Pins PL11",0,CheckBits,255
481,"Amp Pot Enable",0,Button,1
492,"Aux Pot Routing",0,AuxPotRouting,2
483,"2nd DBs preset number",16,None,15
484,"No splitted Preset16",0,Button,1
485,"Save Tabs to Presets",255,Button,1
501,"Busbar Level 16 ",225,TrackBar,250
502,"Busbar Level 5 1/3",250,TrackBar,250
503,"Busbar Level 8 ",250,TrackBar,250
504,"Busbar Level 4 ",250,TrackBar,250
505,"Busbar Level 2 2/3",250,TrackBar,250
506,"Busbar Level 2 ",250,TrackBar,250
507,"Busbar Level 1 3/5",250,TrackBar,250
508,"Busbar Level 1 1/3",250,TrackBar,250
509,"Busbar Level 1 ",250,TrackBar,250
TKN
Beiträge: 7
Registriert: 20. Dez 2015, 09:51
Kontaktdaten:

Re: Preview: Firmware 4.1 BETA

Beitrag von TKN »

#,Description,Value
466,"Horn Slow Timer",17
467,"Rotor Slow Timer",14
468,"Horn Fast Timer",140
469,"Rotor Fast Timer",134
470,"Horn RampUp Time",2
471,"Rotor RampUp Time",20
472,"Horn RampDown Time",1
473,"Rotor RampDown Time",30
474,"Rotary Throb",125
475,"Rotary Spread",50
476,"Rotary Balance",100
604,"Level Tap Main",180
605,"Level Tap Near Cab 4x",160
606,"Level Tap Far",230
607,"Level Input",150
608,"Level Rotor",210
610,"Throb Frequ Rotor",30
611,"Crossover Frequ",52
613,"Initial Room Dly Cab Near",105
614,"Initial Room Dly Far",230
616,"LFO Mod Horn Main L",230
617,"LFO Mod Horn Main R",230
618,"LFO Mod Horn Cab fx4",165
619,"LFO Mod Horn Refl L Near",210
620,"LFO Mod Horn Refl R Near",215
621,"LFO Mod Horn Refl L Far",220
622,"LFO Mod Horn Refl R Far",220
625,"LFO Mod Rotor Main",220
626,"LFO Mod Rotor Refl",220
627,"LFO Mod Rotor Throb",170
648,"LFO PhaseOfs Horn Main",85
650,"LFO PhaseOfs Horn Cab fx4",175
651,"LFO PhaseOfs Horn Refl Near",35
653,"LFO PhaseOfs Horn Refl Far",150
655,"LFO PhaseOfs Horn Throb",100
657,"LFO PhaseOfs Rotor Main",0
658,"LFO PhaseOfs Rotor Refl",90
659,"LFO PhaseOfs Rotor Throb",45
Antworten

Wer ist online?

Mitglieder in diesem Forum: Bing [Bot] und 34 Gäste