Problem with "floating" volume/swell?
Verfasst: 21. Dez 2012, 07:43
Hi all,
there is an issue with the HX3's 1/4" jacks from manufacturer Cliff, UK which affects the swell pedal input. Sometimes the jack's middle switch contact does not close after removing the plug. So the HX3 controller's swell input is floating and not fixed to maximum volume.
If you experience "floating" volume when swell pedal removed, there is a quite easy fix: bridge the switch by a standard 220 kOhms resistor (may be soldered to middle two pins of jack on solder side).
there is an issue with the HX3's 1/4" jacks from manufacturer Cliff, UK which affects the swell pedal input. Sometimes the jack's middle switch contact does not close after removing the plug. So the HX3 controller's swell input is floating and not fixed to maximum volume.
If you experience "floating" volume when swell pedal removed, there is a quite easy fix: bridge the switch by a standard 220 kOhms resistor (may be soldered to middle two pins of jack on solder side).