3.62 No Reverb? Routing unclear

[w_esch]

Hi,
just updated HX3 MK2 to 3.62. Excellent Leslie sound, but no reverb anymore. Switching on via Panel or vie HX3 remote with no effect. ALso routing of Jack config is cumebrsome. Can anybody help?
Best Wolfgang

[happyfreddy]

hi
wenn neue Enstellungen via Panel vorgenommen werden MÜSSEN diese auch abgespeichert werden !!!
Vielleicht liegts daran ??

[bovist]

Hi,
just updated HX3 MK2 to 3.62. Excellent Leslie sound, but no reverb anymore. Switching on via Panel or vie HX3 remote with no effect. ALso routing of Jack config is cumebrsome. Can anybody help?
Best Wolfgang

Please remove JP6/7 near reverb DSP after DSP update (file hoax3rev.bin; done that?)

Jumpers JP6/7 only needed for DSP update, will disturb I2C communication if remaining. Note: Files dsp_rev.bin and hoax3rev.bin are the same, just different names.

As HX3 mk2 has 4 output channels, routing is more versatile (you may call it "complicated"). All signals are available all the time, just on different jacks.

Jack1 tip/ring - Jack2 tip/ring
ORG/PD - L/R - means plain organ and pedal on one jack, stereo leslie sim on other
PD/ORG - R/L - same as first, but tip/ring swapped
L/R - ORG/PD - same as first, but jacks swapped
R/L - PD/ORG - same as second, but jacks swapped etc.
ORG/L - PD/R
L/ORG - R/PD
PD/R - ORG/L
R/PD - L/ORG
AMP/PD - L/R - same as first, but 122 tube amp sim instead of plain organ on jack 1
PD/AMP - R/L
L/R - AMP/PD
R/L - PD/AMP
AMP/L - PD/R
L/AMP - R/PD
PD/R - AMP/L
R/PD - L/AMP

Description: L and R = rotary cabinet sim left/right channel, ORG = plain organ signal like G-G on B3, AMP = organ signal with Leslie tube amp sim and overdrive (controlled by Leslie volume pot or parameter), PD = bass pedals. Other 16 settings are same as above, but with bass pedal signal added to organ, amp sim and leslie signals.

Anyway, this config has only to be done once. For HX3 mk2, you may simply add bass to configuration B to resemble the old "Add Bass to Leslie" tab.

[w_esch]

Hi,
That was the reason. I forgot to remove the jumper.
The explanation helped. Thanks a lot
Wolfgang

[Organuts]

Hi,
just updated HX3 MK2 to 3.62. Excellent Leslie sound, but no reverb anymore. Switching on via Panel or vie HX3 remote with no effect. ALso routing of Jack config is cumebrsome. Can anybody help?
Best Wolfgang

Jack1 tip/ring - Jack2 tip/ring

Which Jack is which?

Is Jack 1 = "MAIN/BASS" and Jack 2 = "ROTARY/AMP"??