Hi,
I suspect that parameter 521 is inactive or does not function properly. Using teraterm (Remote programmer does not allow to edit this parameter) and setting wen=1, 521=255 to disable analog inputs seems to work but, after a few startups, drawbar levels change continuously in all presets 0-15. With drawbars connected the problem should disappear but at the moment I program the sound using the LCD panel. Previous versions were not affected by this problem.
Thank you for your assistance
Regards
Angelo
Unstable LCD reading
Moderator: happyfreddy
-
- Beiträge: 37
- Registriert: 5. Mär 2014, 10:41
- Kontaktdaten:
-
- Beiträge: 37
- Registriert: 5. Mär 2014, 10:41
- Kontaktdaten:
Re: Unstable LCD reading
I've repeated the procedure with Teraterm and now 521=255 is memorized permanently. I do not know what was missing before but now everything seems perfect. Maybe this parameter should be included in Remote.
Regards
Angelo
Regards
Angelo
-
- Site Admin
- Beiträge: 476
- Registriert: 6. Jul 2012, 14:28
- Kontaktdaten:
Re: Unstable LCD reading
Hi Angelo,
HX3 Remote had a small bug in "Write Basics" function that transmitted "1" instead of "255" value with Booleans (Enables etc.) of value "true". Fixed with version 1.09 (online).
Do not use Param 521 anymore; you should use 477 (ExpanderMode) instead.
HX3 Remote had a small bug in "Write Basics" function that transmitted "1" instead of "255" value with Booleans (Enables etc.) of value "true". Fixed with version 1.09 (online).
Do not use Param 521 anymore; you should use 477 (ExpanderMode) instead.
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 44 Gäste