Mono/Stereo Jumper JP6

[bovist]

Hi,

there might be some confusion about the mono/stereo jumper JP6 and pedal bass routing. JP6 only affects the main output, not the leslie sim.

If it is set to stereo, organ without pedal signal is routed to left ch (stereo plug tip) and pedal is routed to right ch (plug ring).

If it is set to mono, organ and pedal signal is mixed to left ch (stereo plug tip), right ch (plug ring) is off.

Leslie output is always spatial stereo. There is no way to separate rotor and horn (maybe in some future version). A panel switch/button input decides if pedal signal is mixed to leslie sim output (switch ON) or not (switch OFF, default) internally. So you may obtain the organ signal without pedals on leslie output and separate pedal bass on right channel of organ main output (plug ring) if JP6 set to stereo.

Hope that helps.

[MnonoaN]

without pedal signal is routed to left ch (stereo plug tip) and pedal is routed to right ch (plug ring).

Nachspann entfernt da unzulässige Werbung / Link

30.03.2021 happyfreddy
Moderator