Weil manchmal danach gefragt wird:
Um den Halfmoon-Schalter von Hammond an der Rotary-Schalterbuchse des HX3 zu betreiben, sind folgende Änderungen nötig: Kabelverbindung zu den Schaltkontakten vertauschen: Chorale an Ring des 6,3mm-Steckers, Tremolo an Spitze. Diode (z.B. 1N4148) zwischen den beiden Anschlüsse einlöten, Kathode an Tremolo.
Hammond Halfmoon CU-1 an HX3
Moderator: happyfreddy
-
- Beiträge: 142
- Registriert: 14. Nov 2015, 13:46
- Kontaktdaten:
-
- Beiträge: 13
- Registriert: 12. Okt 2020, 13:39
- Kontaktdaten:
Re: Hammond Halfmoon CU-1 an HX3
did not know this was possible , so you end up using just one pole of the CU-1 ? also with the brake function ?
-
- Beiträge: 2339
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: Hammond Halfmoon CU-1 an HX3
If the break function is wanted the jack and switch must be configurated like this
viewtopic.php?f=3&t=531
I always use a 2 way gitar switch. This switch has 3 positions and two switches
inside , cost about 5 Euro
viewtopic.php?f=3&t=531
I always use a 2 way gitar switch. This switch has 3 positions and two switches
inside , cost about 5 Euro
-
- Beiträge: 13
- Registriert: 12. Okt 2020, 13:39
- Kontaktdaten:
Re: Hammond Halfmoon CU-1 an HX3
okay , from the schematic , the ring remains ground in both fast and slow positions . and i assume ring must also remain
grounded for fast to function ?
grounded for fast to function ?
-
- Beiträge: 2339
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: Hammond Halfmoon CU-1 an HX3
Hi
Yes of course !!! It´s the same when the RUN button is on.
The switch must be for opration Slow - Stop - Fast a 3 way type with a middle
position.
Yes of course !!! It´s the same when the RUN button is on.
The switch must be for opration Slow - Stop - Fast a 3 way type with a middle
position.
-
- Beiträge: 142
- Registriert: 14. Nov 2015, 13:46
- Kontaktdaten:
Re: Hammond Halfmoon CU-1 an HX3
The CU-1 I saw is single pole. That is why I soldered the diode between FAST and ON. It connects ON to ground in FAST position.
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 63 Gäste