midi bass pedals

[brad lewis]

Please help I have an HX3.5 equipped with 2 fatars via two drawbar modules. I want to connect a custom made midi controller to add bass pedals input, but when I have them connected the signal is not received. I have tested the midi controller by running it through various keyboards with midi in and they work just fine, but when I connect it to the HX3 midi in it does not work. My understanding is that I should be able to run fatar scans and a midi in to channel 3 to get bass pedal sounds, but this appears to not be the case. Am I missing a jumper or is HX3 just not capable of working this way?
Thank you to anyone who has more info on this topic

[happyfreddy]

HI
FIRST THING TO DO is
register in this forum in correct way.
To be alway logged in set the marker to be always logged in.
So next time when You visit the site You will be automaticly logged in

You wrote as a guest - so You name is shown in red letters -
The red colour is reserved only for the ADMIN

To Your problem :
The HX 3 accepts MIDI in at
channel 1 for upper keys
channel 2 for lower keys
channel 3 for pedal keys ( maximum 25 keys )
When Your " test keyboard " sends data on channel 3 it must work for the lower 25 keys.
control that they are in correct octave position.