I want to control the fast and slow leslie effect using the sustain pedal connected to the FootSwitch input.
I need to shut down to release a fast ef. Press again to release the slow ef.
Can it be set in the editor :?:
Control Leslie
Moderator: happyfreddy
-
- Beiträge: 6
- Registriert: 30. Okt 2021, 21:13
- Kontaktdaten:
-
- Beiträge: 2343
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: Control Leslie
You have on back side of the Expander a stereo Jack for switching
the Leslie Effekt Slow - Fast - Stop
The shaft of Jack is GROUND
The ring switches against Ground RUN and STOP Modus
The Pin switches against Ground FAST - SLOW modus
The Fast - Slow Modus only happens when the RUN Modus is ON
In either position of fast - slow this modus will stop when the RUN Modus is OFF
So in Your case You only have to plug in a SWITCH with PIN and GROUND connection
The RUN Pin must then always being shortened to Ground
the Leslie Effekt Slow - Fast - Stop
The shaft of Jack is GROUND
The ring switches against Ground RUN and STOP Modus
The Pin switches against Ground FAST - SLOW modus
The Fast - Slow Modus only happens when the RUN Modus is ON
In either position of fast - slow this modus will stop when the RUN Modus is OFF
So in Your case You only have to plug in a SWITCH with PIN and GROUND connection
The RUN Pin must then always being shortened to Ground
-
- Beiträge: 6
- Registriert: 30. Okt 2021, 21:13
- Kontaktdaten:
Re: Control Leslie
happyfreddy thank you for the advice
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 32 Gäste