Midi channel settings in HX3.5

Erfahrungen und allgemeine Fragen zu den HX3.5/3.6-Boards und zum HX3 Manager

Moderator: happyfreddy

HenrikP
Site Admin

Midi channel settings in HX3.5

Beitrag von HenrikP »

First of all; What a great idea and product.

I have the HX3.5 board in a Plexi "Midi expander" enclosure.

My issue is the Midi channel setting. In my band setup, Midi Ch.1 is reserved already for another device that cannot be changed.
So I try to set "MIDI Channel" on HX Plexi control panel to Ch.2. (so upper should be=2, lower=3 and pedal=4), but then no sound heard on any channels.
Trying to change midi channel in editor seems not do do any difference. In default Ch.1 setting, HX responds fine on Ch.1-3.
Any ideas about this issue?

Best regards
Heinz
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: Midi channel settings in HX3.5

Beitrag von happyfreddy »

hi
Normally any change of Midi Channels (1,2,3 or 2,3,4 or 3,4,5 etc ; channels must always follow directly)
will run.
We will control again those softwareparts and if there is any mistake You will get an update promtly
Christian
Beiträge: 142
Registriert: 14. Nov 2015, 13:46
Kontaktdaten:

Re: Midi channel settings in HX3.5

Beitrag von Christian »

Thanks for the information. We have verified the issue. Will be addressed immediately with ScanCore update .15.
HenrikP
Site Admin

Re: Midi channel settings in HX3.5

Beitrag von HenrikP »

Thanks so much! It works perfectly now :D

Best regards
Heinz


Zuletzt als neu markiert von Anonymous am 3. Okt 2018, 05:53.
Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste