First of all; What a great idea and product.
I have the HX3.5 board in a Plexi "Midi expander" enclosure.
My issue is the Midi channel setting. In my band setup, Midi Ch.1 is reserved already for another device that cannot be changed.
So I try to set "MIDI Channel" on HX Plexi control panel to Ch.2. (so upper should be=2, lower=3 and pedal=4), but then no sound heard on any channels.
Trying to change midi channel in editor seems not do do any difference. In default Ch.1 setting, HX responds fine on Ch.1-3.
Any ideas about this issue?
Best regards
Heinz
Midi channel settings in HX3.5
Moderator: happyfreddy
-
- Beiträge: 2341
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: Midi channel settings in HX3.5
hi
Normally any change of Midi Channels (1,2,3 or 2,3,4 or 3,4,5 etc ; channels must always follow directly)
will run.
We will control again those softwareparts and if there is any mistake You will get an update promtly
Normally any change of Midi Channels (1,2,3 or 2,3,4 or 3,4,5 etc ; channels must always follow directly)
will run.
We will control again those softwareparts and if there is any mistake You will get an update promtly
-
- Beiträge: 142
- Registriert: 14. Nov 2015, 13:46
- Kontaktdaten:
Re: Midi channel settings in HX3.5
Thanks for the information. We have verified the issue. Will be addressed immediately with ScanCore update .15.
-
- Site Admin
Re: Midi channel settings in HX3.5
Thanks so much! It works perfectly now :D
Best regards
Heinz
Best regards
Heinz
Zuletzt als neu markiert von Anonymous am 3. Okt 2018, 05:53.
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 4 Gäste