XB2 HX3 real vibrato switch

Rund um die "Clonewheels" HX3.1 bis HX3.4 (mk4) und HOAX 2

Moderator: happyfreddy

Greentree57
Beiträge: 4
Registriert: 13. Jul 2017, 15:16
Kontaktdaten:

XB2 HX3 real vibrato switch

Beitrag von Greentree57 »

Hello ,
I have an XB2 / HX3 (FW 4.25) and want to know if i can add a real 6 position switch to the HX3 mainboard on connector PL5.
In this way the control over the vibrato's is a lot easier to do.

I know the kit is a special version, but the mainboard is basiccally a HX3 MK4.

Thanks,
Peter
bovist
Site Admin
Beiträge: 475
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Re: XB2 HX3 real vibrato switch

Beitrag von bovist »

Hello,

unfortunately not, as the port is not polled by the XB2 version firmware.
Greentree57
Beiträge: 4
Registriert: 13. Jul 2017, 15:16
Kontaktdaten:

Re: XB2 HX3 real vibrato switch

Beitrag von Greentree57 »

Aha,
and it is also not possible to change this by modifying a parameter, using the remote software?

best regards,
Peter
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: XB2 HX3 real vibrato switch

Beitrag von happyfreddy »

The XB2 HX 3 version is a special version of HX 3 and can´t be compared with normal HX 3 .

If You want to connect the vib switch You must forget all the stuff of XB 2 version. Disconnect all the
XB 2 stuff and buildt the HX 3 up as a normal HX 3 with FATAR keys etc
Greentree57
Beiträge: 4
Registriert: 13. Jul 2017, 15:16
Kontaktdaten:

Re: XB2 HX3 real vibrato switch

Beitrag von Greentree57 »

OK, clear.
In order to create something like a B3 vibrato switch, I could use the midi interface, and send the correct values on CC's 73 and 74, using a controller, e.g. an arduino with a MIDI library.

Correct?
This will not interfere with the speciality of the XB2 inplementation?

Thanks and best regards,
Peter
Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 38 Gäste