need some help
Moderator: happyfreddy
-
- Beiträge: 26
- Registriert: 11. Sep 2019, 20:02
- Kontaktdaten:
Re: need some help
I explain poorly.
I have connected all switches (tabs) to PL25 and PL26 that I want to use vibato upper vibrato lower and percussion reverb etc, but when I change function on Button / Switch Input Assignment / Remap nothing changes. how-to?
I have connected all switches (tabs) to PL25 and PL26 that I want to use vibato upper vibrato lower and percussion reverb etc, but when I change function on Button / Switch Input Assignment / Remap nothing changes. how-to?
-
- Beiträge: 2343
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: need some help
If using the real switches of the Hammond You must declare via editor those buttons
as real switches !!!
The default configuration is push button . So that´s the reason of no function
as real switches !!!
The default configuration is push button . So that´s the reason of no function
-
- Site Admin
Re: need some help
I've edited in Button Mask 0 Button Mask 1 for switches, is it more? the problem remains.
-
- Beiträge: 2343
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: need some help
If any parameter has been changed You must send this group values to HX 3
When all finished You must finalize all
But before any operation make a backup as discribed in Editor with a name Your chose.
( default parameters and Your serialnumber, licenced etc )
When all finished You must finalize all
But before any operation make a backup as discribed in Editor with a name Your chose.
( default parameters and Your serialnumber, licenced etc )
-
- Beiträge: 26
- Registriert: 11. Sep 2019, 20:02
- Kontaktdaten:
Re: need some help
Ok, start with move buttons in organ, maybe later edit in the deep.
Thanks
Thanks
-
- Beiträge: 2343
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: need some help
It´s allowed to connect from each switch of percussion panel til split switch a LED in series with
220 Ohms to VCC. Each switch switches against GND.
In this case use low current LEDs.
So if Your board is still configurated for buttons it must run.
The function of these switches will happen when You turn ON and promtly OFF the switch.
If the switch is held down nothing will happen because buttons work with rising edge
of signal.
Later when configurated as real switch the LED will show You switch is on or off
220 Ohms to VCC. Each switch switches against GND.
In this case use low current LEDs.
So if Your board is still configurated for buttons it must run.
The function of these switches will happen when You turn ON and promtly OFF the switch.
If the switch is held down nothing will happen because buttons work with rising edge
of signal.
Later when configurated as real switch the LED will show You switch is on or off
-
- Beiträge: 26
- Registriert: 11. Sep 2019, 20:02
- Kontaktdaten:
Re: need some help
I find switch remap button on right side on edit program.
So all is great.
So all is great.
-
- Beiträge: 26
- Registriert: 11. Sep 2019, 20:02
- Kontaktdaten:
Re: need some help
how do i switch between wersi, H-100 and B-3 mode in a good way with the reverse preset keys?
-
- Beiträge: 2343
- Registriert: 19. Jul 2012, 09:32
- Kontaktdaten:
Re: need some help
First You need the licence for H 100 mode
called extended licence
https://shop.keyboardpartner.de/epages/ ... e_Upgrades
without this licence no use of this part like H 100 etc of HX 3.5 is possible
The You have to study several manuals
http://wiki.keyboardpartner.de/index.ph ... _(deutsch)
- HX3.5 Backgrounder (deutsch)
- HX3.5 Mainboard Bedienungsanleitung als druckbares PDF
- HX3.5 Editor Bedienungsanleitung als druckbares PDF
In moment they only exsist in german version
important is in using the presets for different changes to define them
as OVER ALL PRESET - You must do this for every preset separatly !
called extended licence
https://shop.keyboardpartner.de/epages/ ... e_Upgrades
without this licence no use of this part like H 100 etc of HX 3.5 is possible
The You have to study several manuals
http://wiki.keyboardpartner.de/index.ph ... _(deutsch)
- HX3.5 Backgrounder (deutsch)
- HX3.5 Mainboard Bedienungsanleitung als druckbares PDF
- HX3.5 Editor Bedienungsanleitung als druckbares PDF
In moment they only exsist in german version
important is in using the presets for different changes to define them
as OVER ALL PRESET - You must do this for every preset separatly !
-
- Site Admin
Re: need some help
ofcouse I have extended licence.
By over all presets do you mean param 1504 (2)?
By over all presets do you mean param 1504 (2)?
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 6 Gäste