need some help

Erfahrungen und allgemeine Fragen zu den HX3.5/3.6-Boards und zum HX3 Manager

Moderator: happyfreddy

Christian Larsson
Beiträge: 26
Registriert: 11. Sep 2019, 20:02
Kontaktdaten:

need some help

Beitrag von Christian Larsson »

I'm new here and new HX3.5 drawbars modul owner.

sorry for google translation.

I use Electone HS4 as a master keyboard but do not get the volume pedal to work on Hx3.
Electone HS4 transmits on midi channel 16.
how do I change HX3 to receive midi channel 16 for volume?
The HX3.5 contains a fantastic sound. I am very happy.

Best Regards Christian
bovist
Site Admin
Beiträge: 475
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Re: need some help

Beitrag von bovist »

Hello,

HX3 always receives Volume CC (7) and Swell pedal CC (11) on upper MIDI channel (1 by default). However, it is possible to map Volume and Swell CCs to other CC numbers (use Menu or HX3.5 Editor), but not on different MIDI channels - sorry.

Perhaps some kind of MIDI translator box can do that conversion from channel 16 to 1.
Christian Larsson
Beiträge: 26
Registriert: 11. Sep 2019, 20:02
Kontaktdaten:

Re: need some help

Beitrag von Christian Larsson »

Thanks for the reply.
i am trying to mount an external pot on hs4 volume pedal.

Ch
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: need some help

Beitrag von happyfreddy »

I don´t know how the HS 4 volume Pedal works.
For HX 3 we use the Yamaha FC 7 swell pedal as default.
Inside there is a simple poti. with 10k value ( value is not critical )
If Your HS4 volumepedal uses also a poti it is perhaps possible to change it
to a stereo poti version. So You only have to connect the second half of this
poti to HX 3
Christian Larsson
Beiträge: 26
Registriert: 11. Sep 2019, 20:02
Kontaktdaten:

Re: need some help

Beitrag von Christian Larsson »

Another problem.
In H-100 mode with percussion without vibrato,
becomes the same organ drawbars voice will be without vibrato.
Am I doing something wrong?
How do I attach a picture?

Christian L
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: need some help

Beitrag von happyfreddy »

When You hit Answer button You see below the mark
" DATEIANHÄNGE " . That is the upload function.
Click on " DATEIEN HINZUFÜGEN "
When pic is uploaded You must mark
"IM BEITRAG ANZEIGEN"

Before You click this button put the CURSOR to that point in Your text, where You want to
show the picture
When posting finished click "ABSENDEN" as You did it before other postings You made.
Christian Larsson
Beiträge: 26
Registriert: 11. Sep 2019, 20:02
Kontaktdaten:

Re: need some help

Beitrag von Christian Larsson »

what is the term on the white contacts?
so I buy the right female contact
20191019_120648.jpg
(1.64 MiB) 2103-mal heruntergeladen
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: need some help

Beitrag von happyfreddy »

Hi
The white terms are connected parallel to the below unsoldered terms and to the
26pol plug.
The unsoldered are for original Hammond connectors as used in a B 3000
for example ( special distance between the pins ).
So it´s Your chose to use the white plugs or the 26 pol flat cable plug

The connection to white plugs or 26 pol is simple.
Pin 1 is the lowest key in a bass pedal and Pin 26 is GND
each keycontact switches against GND.
You can connect this way basspedals with 13 , 17 or maximum 25 keys.
Not existing real keys were not connected.

When I realize the connection to pedal keys I use always the flat cable plug
The simple way to connect an extern pedal is to make an special cable from
26pol plug to a 25 pol SUB D plug using a normal printer extension cable.
These printercables have a shield connected to the metal body of a 25 pol SUB D plug.
So those printer connection cables have in thruth 26 poles !!! The shield connector I use
always as GND connector so that the pins 1 to 25 correspond to the key numbers.
Christian Larsson
Beiträge: 26
Registriert: 11. Sep 2019, 20:02
Kontaktdaten:

Re: need some help

Beitrag von Christian Larsson »

now I have started with B3000 / HX3.5.
how do i assign digital switches functions on pl25 and pl26?
when I change 5100-5115 to the desired function,
the factory settings remain 5100 perc on etc.
for example, I want Leslie on at 5100
what am i doing wrong?
20191025_202211.jpg
(2.02 MiB) 2074-mal heruntergeladen
happyfreddy
Beiträge: 2340
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: need some help

Beitrag von happyfreddy »

on factory setting all presets only change the voice.If wanted other things
like Leslie ON too You must define that preset as an " over all preset " first
with editor.
After that You can programm the preset as You like it in this case with function
leslie on.
Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 4 Gäste