Random velocities 127 at note off on midi out

Erfahrungen und allgemeine Fragen zu den HX3.5/3.6-Boards und zum HX3 Manager

Moderator: happyfreddy

JoostO
Beiträge: 4
Registriert: 11. Jan 2021, 19:27
Kontaktdaten:

Random velocities 127 at note off on midi out

Beitrag von JoostO »

Hi there, first post.
I’m very happy with my home built HX3.5 organ. I jumpered the 2nd midi connector as midi out to play the E-piano sounds on my Yamaha Reface CP. I’d love not to have to take two large keyboards to a rehearsal...
I experience random notes with max velocities 127 when releasing a note:
-happens every now and then, not often but too often to be playable with an audience.
-not bound to specific notes.
-not reproducible. But happens only when playing chords it seems.
-the very loud and very shot note is NOT the note I’m releasing.
-it doesn’t ever happen when playing organ normally. (Of course velocity there has only an impact on key click right?)

Any one any clues? I don’t think it’s the Fatar keybed because it’s not bound to certain notes.
Thanks!
bovist
Site Admin
Beiträge: 475
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Re: Random velocities 127 at note off on midi out

Beitrag von bovist »

Hello Joost,

spurious "fast" notes should have been fixed with Scan Driver #5x.30, contained in #5.627 update package (see changelog on http://keyboardpartner.remotewebaccess. ... 20Firmware). You may update the scan driver separately with HX3.5 Editor.
harald
Beiträge: 40
Registriert: 4. Dez 2013, 08:58
Kontaktdaten:

Re: Random velocities 127 at note off on midi out

Beitrag von harald »

I just experienced the same issue again.
After updating the system it sometimes produces NoteOn with velocity 127 in the 3rd octave of the lower manual.
Scan core is 51.33

Best regards,
Harald
bovist
Site Admin
Beiträge: 475
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Re: Random velocities 127 at note off on midi out

Beitrag von bovist »

If random high velocity notes are present on one manual only, there must be a problem with key contacts. The scan driver handles both keyboards in the very same way.

You may try to swap upper and lower 16-pin kbd connectors on FatarScan2 board to verify.
Antworten

Wer ist online?

Mitglieder in diesem Forum: stefan64 und 6 Gäste