Trouble updating to 5.630 FW

Erfahrungen und allgemeine Fragen zum HX3.5-Board und zum HX3.5 Editor

Moderator: happyfreddy

JoostO
Beiträge: 3
Registriert: 11. Jan 2021, 19:27
Kontaktdaten:

Trouble updating to 5.630 FW

Beitrag von JoostO »

Sorry to inform you the update to 5.630 went wrong. I have a custom home build organ:
-HX3.523 board
DB9MPX & DB12
menu panel
panel 16
fatar scan board.

I opened HX3.5 editor
selected custom build organ
clicked "Update!"
After some minute it prompted: do you want to select custom ini file (or something like that). I didn't know what to do so I chose "update_script.ini"
Dream updater started, ended with "unplug device" and than "searching for device" which didn't go away. I pressed "abort"
Than I was prompted to select a .dfu file, I selected 'HX35_5504-FW_0121.dfu'
Then the process seemed to go on right ending with "reboot, closing midi ports, trying sync...
Organ restarted but gave warning "not finalized"
Editor freezes.
Organ gives no sound but I can hear the rotor "Whoosh."

So, what to do? Help would be appreciated, thanks!
(Sorry don't know to post a picture here. I can mail one of the frozen editor screen with the last part of the update log.)
JoostO
Beiträge: 3
Registriert: 11. Jan 2021, 19:27
Kontaktdaten:

Re: Trouble updating to 5.630 FW

Beitrag von JoostO »

Update:
I forced stoped the frozen editor
restarted the organ, again warning "not finalized"
I DO get sound but all my settings are gone.
I restarted the editor
I could connect and parameters as drawbars react but very slowly
Update/finalize window: ERROR: sync failed
No more sound from the organ.
Editor freezes.
happyfreddy
Beiträge: 1725
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: Trouble updating to 5.630 FW

Beitrag von happyfreddy »

Hi
Please send a email to Keyboardpartner direct an write down
Your used Board Version / Extension board and detailed items what happened
when starting update.
Hammond H 112 auf Säulen
Wersi Spectra auf Chromsäulen + HX 3.5
Wersi Spectra im Prisma Gehäuse, Livestyle + OX 7up
WERSI HELIOS W2TV spezial + HX 3.5
HX 3 B 3 look (mk 4 )
HX 1 Labormuster von 2010 mit Röhrenvorstufe
Leslie 770
Christian
Beiträge: 114
Registriert: 14. Nov 2015, 13:46
Kontaktdaten:

Re: Trouble updating to 5.630 FW

Beitrag von Christian »

Also please include your phone number and when you can be reached, so that we can call you if necessary.

Christian
bovist
Site Admin
Beiträge: 470
Registriert: 6. Jul 2012, 14:28
Kontaktdaten:

Re: Trouble updating to 5.630 FW

Beitrag von bovist »

Hello Joost,

we apologize for the inconvenience. Running the update_script.ini as a config script will result in an endless loop, as the update script is called by itself.

On custom made organs (non-keyboardpartner products like DIY, Uhl or MAG) a custumized INI file may be run. We supply INI files for our MIDI/Drawbar Expanders as well as standard Fatar-equipped organs with 2 or 4 drawbar sets, MAG and Uhl organs, but as we cannot determine your particular configuration, some manual adjustments may be necessary. If in doubt, do NOT run any config script, check parameters manually instead.

If anything went wrong, it may help to re-install the update parts manually with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable".
  • Connect to organ by clicking "Connect"
  • Are "Organ Licence" and "Extended Licence" (if purchased) lit up "OK"?
  • Check board information: are "Board Summary" entries correct?
  • FPGA:11012021, FW: 5.630, ScanCore: 5x:32, DSP Version: x1.23
  • Does Scan Driver match your configuration (Fatar, MIDI or Scan61)?
Update manually all parts that differ in version number or if scan driver type (Fatar, MIDI or Scan61) is not correct. To prevent corrupted EEPROM (non-volatile configuration data), always update EEPROM after a crash.

Automatic update will not install the new Piano soundbank by itself. It must be uploaded with HX3.5 Edtor's Update/Finalize window, menu "Update -> Update via USB or FTDI cable -> DSP (byDreamDFU)". the process is similar to DSP firmware update.

On Jan. 13th I made a small change to Editor/Updater (will have increased reliability) and Fatar scan driver (BASS25 was not working). Please download ZIP file again if downloaded before Jan 13th, 21:00.
Gruß, Carsten aka bovist
----------------------------------------------------
Manchmal weiß ich einfach nicht, wie ich einen Satz beenden

Philicorda AG7500
Bontempi PM68
Farfisa Jaqueline Deluxe
Schellenring 30cm
Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast