HX3 driven by Hammond XK3 pedal drawbars

Erfahrungen und allgemeine Fragen zum HX3.5-Board und zum HX3.5 Editor

Moderator: happyfreddy

lucasasdelli
Beiträge: 2
Registriert: 4. Jul 2019, 17:12
Kontaktdaten:

HX3 driven by Hammond XK3 pedal drawbars

Beitrag von lucasasdelli » 4. Jul 2019, 17:20

Hi all,

my Hammond XK3 drives perfectly the HX3 MIDI Expander, but there is no effect by acting on the two Bass drawbars. All other drawbars does work perfectly.

By enabling "Manual Bass" mode on XK3, the basses are played by the HX3 expander, but only at maximum volume: the XK3's bass drawbars doesn't have any effect on them. As well, on HX3 display all other drawbars does change the voice values, but the bass ones doesn't.
MIDI output shows that they transmit value changes as they should do, therefore it seems an expander issue to me.
Of course, bass drawbars does work properly with embedded XK3 tone generators.

MIDI setup is as per default, so CH1 = upper, CH2 = lower, CH3 = bass pedals.

Did anybody have this issue?

Thanks!
Luca

clp560
Beiträge: 118
Registriert: 21. Jul 2014, 15:37
Kontaktdaten:

Re: HX3 driven by Hammond XK3 pedal drawbars

Beitrag von clp560 » 8. Jul 2019, 21:02

Hi,

I was only able to test this today and I found the same problem. I just upgraded my expander recently to HX 3.5 (previous board had no problems with the pedal drawbars) but had not tried the pedals yet. I'm using an XK3 and all the other controls work ok. All midi inputs are correct and MidiOx shows that the bass drawbars are sending their midi outputs ok.

Would be good to have a fix for this. Hopefully Carsten will get time to check this out.

Paul

happyfreddy
Beiträge: 1347
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: HX3 driven by Hammond XK3 pedal drawbars

Beitrag von happyfreddy » 8. Jul 2019, 21:06

I´ll inform Carsten tomorrow about the problem
Which update release is used ?
happyfreddy
Hammond H 112 auf Säulen
Wersi Spectra auf Chromsäulen (+ HX 3 im Bau)
Wersi Spectra im Prisma Gehäuse
Leslie 770
HX 3 B 3 look (mk 4 )
HX 2 auf Chromsäulen (mk 1)
HX 1 Labormuster von 2010 mit Röhrenvorstufe
WERSI HELIOS W2TV spezial + HX 3.5

clp560
Beiträge: 118
Registriert: 21. Jul 2014, 15:37
Kontaktdaten:

Re: HX3 driven by Hammond XK3 pedal drawbars

Beitrag von clp560 » 9. Jul 2019, 10:13

Hi,

FW is 5.411
HX3 Mk5 True Organ
FPGA 09072018
Midi input from XK3

Thanks for looking into this.

Paul

lucasasdelli
Beiträge: 2
Registriert: 4. Jul 2019, 17:12
Kontaktdaten:

Re: HX3 driven by Hammond XK3 pedal drawbars

Beitrag von lucasasdelli » 9. Jul 2019, 14:11

A more detail:

XK3' pedal drawbars doesn't update the visual slider indicator on display; moreover, by varying the bass drawbar value on HX3 Expander, the volume stays at maximum level anyway.

My FW is 5.412
HX3 MIDI Expander

Thanks for looking in this issue!
Luca

happyfreddy
Beiträge: 1347
Registriert: 19. Jul 2012, 09:32
Kontaktdaten:

Re: HX3 driven by Hammond XK3 pedal drawbars

Beitrag von happyfreddy » 9. Jul 2019, 21:45

Carsten is informed and will answer soon here
Hammond H 112 auf Säulen
Wersi Spectra auf Chromsäulen (+ HX 3 im Bau)
Wersi Spectra im Prisma Gehäuse
Leslie 770
HX 3 B 3 look (mk 4 )
HX 2 auf Chromsäulen (mk 1)
HX 1 Labormuster von 2010 mit Röhrenvorstufe
WERSI HELIOS W2TV spezial + HX 3.5

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast