Since a while , i discovered that some notes of my HX3 organ are playing much louder ( and some more quiet ) than the adjacent notes.
( Firmware Version 4.21 )
Now I have measured them with my oscilloscope, and indeed :
I find some notes with twice the top value of the notes lying next to it, and that on different places.
When I examine the tapering files of the generator and keyboard wiring with HX3-tapering.exe program, i also see such huge amplitude differences between adjacent notes.
Is that necessary/normal ? Why is it so implemented ?
Where the Hammond Organs (so badly) calibrated in the past ?
I suppose that the tapering files, in case of the HX3, are intended to calibrate the over-all-signal amplitude of the emulated vintage keyboard + drawbar resistor-wiring and the generator together,
and that the outgoiing notes can be equalized by means of these files.
The only thing i’m seeking for is, which is a normal amplitude / frequency curve for a well callibrated Hammond organ ?
Does any of you have some experience with this,
or documentation of how to interprete and adjust of the tapering by means of HX3-tapering.exe program ?
I know that UHL is using a different tapering ( may be for the same reason )
Roland ,
Moderator of the Facebook HX3 Users Group
TAPERING ???
Moderator: happyfreddy
-
- Beiträge: 21
- Registriert: 4. Mai 2016, 22:06
- Kontaktdaten:
-
- Site Admin
- Beiträge: 476
- Registriert: 6. Jul 2012, 14:28
- Kontaktdaten:
Re: TAPERING ???
Hello Roland,
we will check for the next FPGA update.
we will check for the next FPGA update.
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 103 Gäste