Rund um den Hammond-Clone HOAX3

Moderator: happyfreddy

Beiträge: 21
Registriert: 4. Mai 2016, 22:06


Beitragvon rolandds » 1. Feb 2017, 16:22

Since a while , i discovered that some notes of my HX3 organ are playing much louder ( and some more quiet ) than the adjacent notes.
( Firmware Version 4.21 )
Now I have measured them with my oscilloscope, and indeed :
I find some notes with twice the top value of the notes lying next to it, and that on different places.
When I examine the tapering files of the generator and keyboard wiring with HX3-tapering.exe program, i also see such huge amplitude differences between adjacent notes.
Is that necessary/normal ? Why is it so implemented ?
Where the Hammond Organs (so badly) calibrated in the past ?
I suppose that the tapering files, in case of the HX3, are intended to calibrate the over-all-signal amplitude of the emulated vintage keyboard + drawbar resistor-wiring and the generator together,
and that the outgoiing notes can be equalized by means of these files.
The only thing i’m seeking for is, which is a normal amplitude / frequency curve for a well callibrated Hammond organ ?
Does any of you have some experience with this,
or documentation of how to interprete and adjust of the tapering by means of HX3-tapering.exe program ?
I know that UHL is using a different tapering ( may be for the same reason )

Roland ,
Moderator of the Facebook HX3 Users Group

Site Admin
Beiträge: 401
Registriert: 6. Jul 2012, 14:28


Beitragvon bovist » 26. Feb 2017, 14:43

Hello Roland,

we will check for the next FPGA update.
Gruß, Carsten aka bovist
Manchmal weiß ich einfach nicht, wie ich einen Satz beenden

Philicorda AG7500
Bontempi PM68
Farfisa Jaqueline Deluxe
Schellenring 30cm

Zurück zu „HOAX3 Discussion“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste