Keyboardpartner-Forum

same card.
if you change generator type to h100 then keyclick values ​​are changed to 15 15, but with h100 mode with b3 generator keyclick values ​​are saved now i notice. I hear no difference in sound if I change generator in h100 mode, so now it works and sounds as I like.

Hi
H100 conversion and B3000/HX 3 the same board HX3.5 or different ones ??

on my b3000 / hx3 there is not this problem.

my h100 conversion is done but a problem,
each start is keyclick value 15 15 on live preset (00) when I saved 1 3, other presets 1-99 the values ​​are saved correctly.
What am I doing wrong?

Hi Christian,

no sweat, your english is fine.

Unfortunatelly you are right. My problem is more or less solved. My problem is related to the cc set in use.

I guess you are right. The functuality you are looking for is not yet available/implemented. Maybe Carsten will think about it while setting up the next release...

Best regards, Juergen

Hi.
Sorry and sorry for my English (Google trenslate).
if I understand correctly we are not talking about the same problem
the function I am looking for is probably not in Hx3.5 (yet).
when I switch between different presets, the sound I saved will be.
Your problem may be that not all parameters are saved.
My organ has two sets of drawbar for each manual and reverse preset keys and buttons like the B-3 original. preset 00 (live) is saved to B-3 mode and works very well, but would need more live presets to select and program for, for example, H-100 Wersi mode, maybe coming in the future if possible.

Hi Christian,

your H112 project sounds really interesting and challenging.

Please apologize that I am coming back to my question and your answer. I would like you to confirm my problem if it is similar to yours. Currently I am using preset 1-11 for Wersi presets and presets 20 to 30 for H-100 presets and finally 31-35 for B3 presets.

Wersi presets are working well. But every time I use the H100 presets (vibrato to V3 no PHR no Rotary Speaker Routing) and then recall the preset the Expander switches the vibrato to C2!!!

When I check the configuration via Editor everything looks like it should. But as soon as I recall the preset via MIDI call, bang, vibrato to C2. This behaviour looks to me a little bit like your issue.

What do you think?

Kind regards, Juergen

Yes. it would be good to have two or three live presets to switch between easily (B-3 H-100 and Wersi).
I have started a new project, installed an HX3.5 in the H-112 and come as close to the original as possible, keep existing amplifiers and maybe scan the vibrato if I can.
good continuation of the new year

Hi Christian,

I am not sure whether I got you right or not.

As far as I understood you would like the preset keys to change their functionality according to the organ model that is actually in use. In other words:
If you choose H-100 mode you would like the preset keys to provide you with the H-100 presets
If you choose versatile mode you would like the preset keys to provide you with the versatile presets
etc.

Is that correct?

Thanks for clarifying.

Have a happy new year

Juergen

ofcouse I have extended licence.
By over all presets do you mean param 1504 (2)?