HX3 driven by Hammond XK3 pedal drawbars

Antwort erstellen


Diese Frage dient dazu, das automatisierte Versenden von Formularen durch Spam-Bots zu verhindern.
Smileys
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode ist eingeschaltet
[img] ist eingeschaltet
[url] ist eingeschaltet
Smileys sind eingeschaltet

Die letzten Beiträge des Themas
   

Ansicht erweitern Die letzten Beiträge des Themas: HX3 driven by Hammond XK3 pedal drawbars

Re: HX3 driven by Hammond XK3 pedal drawbars

von lucasasdelli » 29. Sep 2019, 17:20

Ok for me too.
Thanks for this fixing!
Luca

Re: HX3 driven by Hammond XK3 pedal drawbars

von clp560 » 26. Sep 2019, 22:37

This update solves the problem in the XK3 - pedal drawbars operating correctly again! Thanks

Paul

Re: HX3 driven by Hammond XK3 pedal drawbars

von clp560 » 24. Sep 2019, 16:30

Thanks for this. I can't try it yet as my HX3.5 is currently not working because of the update issues. I'm guessing the XK3 pedal problem is also fixed in Update 5.506 so I'll confirm that when I'm up and running again,

Paul

Re: HX3 driven by Hammond XK3 pedal drawbars

von bovist » 23. Sep 2019, 17:37

Hello,

I found a glitch in interpreter for MIDI CC set XK in FW 5.412, so the wrong drawbars (12 pedal DB instead of 4 pedal DB as found on expander) where updated. Should be solved with 5.413 version. Please update "Firmware only". No backup neccessary, as EEPROM is preserved.

Re: HX3 driven by Hammond XK3 pedal drawbars

von clp560 » 18. Sep 2019, 09:59

Hi Carsten,

I updated to 5.412 but the problem remains the same. The editor can change the drawbars volume ok but the physical pedal drawbars don't work. One clue might be in the following:

On doing a first attempt at updating to the new 5.5 version (some problems there to address in a separate post) in the new version of the editor I can see the upper/lower screen drawbars moving with the physical drawbars except for the two pedal drawbars. These 'twitch' slightly but are obviously not registering the midi range correctly. I'm certain this will be to do with the XK3's NRPN output not being correctly converted on those two drawbars. Previous firmware/earlier board worked fine.

Thanks for your help

Paul

Re: HX3 driven by Hammond XK3 pedal drawbars

von lucasasdelli » 14. Sep 2019, 14:46

Hi Carsten,
my HX3 MIDI Expander came already with the 5.412 fw and presents this issue.

Apart from the MIDI CC from the Hammond, there is another issue on the Expander itself: by navigating to the Bass bars, the Data Entry knob does vary the bar properly, but not the volume, that remains at maximum irrespective to the bar position.

Best
Luca

Re: HX3 driven by Hammond XK3 pedal drawbars

von bovist » 14. Sep 2019, 13:25

From change from 5.411 to 5.412 there was a small bug that prevented update of pedal drawbars in all MIDI CC sets; this faulty FW was online a few days unintentionally. It should be eliminated by later 5.412 firmware. Please try the FW here:

http://keyboardpartner.remotewebaccess. ... 20Firmware

Just update firmware, not the EEPROM.

If this does not help, please contect me at info [at] keyboardpartner.de; Hammond changed MIDI CCs several times within production runs, so I would need a MIDI dump of pedal drawbar moves to fix this issue.

Re: HX3 driven by Hammond XK3 pedal drawbars

von clp560 » 31. Aug 2019, 15:40

Just wondering if there's been any progress on this issue?

Thanks

Re: HX3 driven by Hammond XK3 pedal drawbars

von happyfreddy » 9. Jul 2019, 21:45

Carsten is informed and will answer soon here

Re: HX3 driven by Hammond XK3 pedal drawbars

von lucasasdelli » 9. Jul 2019, 14:11

A more detail:

XK3' pedal drawbars doesn't update the visual slider indicator on display; moreover, by varying the bass drawbar value on HX3 Expander, the volume stays at maximum level anyway.

My FW is 5.412
HX3 MIDI Expander

Thanks for looking in this issue!
Luca

Nach oben