Umschalten zwischen zwei Deichselbänken

Antwort erstellen


Diese Frage dient dazu, das automatisierte Versenden von Formularen durch Spam-Bots zu verhindern.
Smileys
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode ist eingeschaltet
[img] ist eingeschaltet
[url] ist eingeschaltet
Smileys sind eingeschaltet

Die letzten Beiträge des Themas
   

Ansicht erweitern Die letzten Beiträge des Themas: Umschalten zwischen zwei Deichselbänken

Re: Umschalten zwischen zwei Deichselbänken

von happyfreddy » 27. Feb 2019, 17:21

Hi
Sorry but just in that moment when I posted the first link the complete github
has changed to a new site on our own server.
So the last link in my last posting is that one You must call to get schematics etc

For You have a new board mk 5 You don´t need the old preset board.
That what is for You relevant is the new preset Board 12-2.
In combination with the actual drawbar units it will run without any problem
For one drawbar set for two keyboards plus pedal You need one 9 Drawbars plus the 3 drawbars for pedal = 12 drawbars
and one drawbarset with only 9 drawbars. That with 9 + 3 drawbars is then for lower manual and the other for upper manual.
If You want for each keyboard two sets You must add another Drawbarset with 9 drawbars.
The switching ICs are on the first set for each keyboard.

Re: Umschalten zwischen zwei Deichselbänken

von art bailey » 29. Jan 2019, 14:16

Hi Happyfreddy,

I'm very sorry, but I can't find a button labelled "Dateianhänge" or "attachments" anywhere on the page. Is it located somwhere in a drop down menu on the field where I'm typing this reply?

Thanks for updating the schematic directory, I was confused before as to where to find the schematic.

So, this DIY solution for switching between drawbar sets is in addition to Preset 12? I have MK5, this board is still necessary?

At least temporarily, I'd like to know if the solution I describe is possible. If I can find the "Dateianhänge" button, I'll upload my schematic. Thanks again!

Art

Re: Umschalten zwischen zwei Deichselbänken

von happyfreddy » 27. Jan 2019, 11:53

@ratbailey
For upload any pictures use the below button "Dateianhänge"
when You write Your posting

When uploaded, click option "im Beitrag anzeigen"
Use the cursor for wanted position of pic.

If the measures of pic are to great You must transform it smaller till
a green mark says upload ok . Only then a upload is accepted

For switching between the two drawbar set each manual normally the preset 12 board is used.
I have posted in forum at several threads about alternative methods for those who use other
drawbar components than usual drawbar boards from shop.

viewtopic.php?f=3&t=467

The switching between two drawbarsets must be done using the 74 HC 4053 chip.
Using normal CMOS 4053 can operate but must not in any case. This is caused in the 3,3 V supply
for the drawbars.
The newer HX 3 mainbaords up from mk 4 have another design in drawbar plugs than the older ones
till mk 3 version. In newer mainboards the pin 16 of drawbar plug is separated for switching between two sets.

This pin is driven by the PRESET 12 - 2 board and the switching ICs 74 HC 4053 are " on board " of the
drawbar PCB´s

If any other drawbars like old ones from real Hammond organs all this must be done on own designed PCBs

The link above shows how to do if wanted.
The schematics are now there to find for preset 12 board
http://keyboardpartner.remotewebaccess. ... e/Preset12

The old version preset 12 has on board the switching flipflop 4011 which is driven by the
PCA 9532D.

Re: Umschalten zwischen zwei Deichselbänken

von ratbailey » 27. Jan 2019, 03:29

Hi Happyfreddy-

Thanks for responding--I'll post a kludgy Google translation for non-English speakers :). I had a feeling it was going to be pretty poor.

Yes, I found all of your helpful advice regarding the resistance ladder. I don't know the exact model these drawbars came from, but they're early ratchet-style. What I'd like to be able to do is switch between the two adjacent sets of 9 drawbars. My idea is to sever either bus number 1 or 9, which would either be ground or 3.3 volts, in between the 1' drawbar in the first group of nine, and the 16' drawbar in the next group. In between the two groups, I'd place a rocker switch that'd supply either the ground or 3.3v to one bank or the other. The same drawbars from both groups would be connected together (16' to 16', 5 1/3 to 5 1/3, etc), but only the one receiving the voltage or ground would be activated.

That's a complicated explanation for a simple idea. Here's a link to a schematic I drew (can't figure out how to get it to post...I'm a mess) https://photos.google.com/album/AF1QipM ... HS554mdQWv



Unless I'm seriously mistaken about how the analog drawbars work, which is entirely possible, it seems like this should work, no?

All the best,
Art


Ja, ich habe alle Ihre hilfreichen Ratschläge bezüglich der Widerstandsleiter gefunden. Ich kenne das genaue Modell, aus dem diese Deichsel stammen, nicht, aber sie sind im frühen Ratschenstil. Ich möchte gerne in der Lage sein, zwischen den zwei nebeneinander liegenden Sets von 9 Zugstangen zu wechseln. Meine Idee ist, entweder Bus Nummer 1 oder 9, der entweder Masse oder 3,3 Volt ist, zwischen der 1'-Zugstange in der ersten Gruppe von neun und der 16'-Zugstange in der nächsten Gruppe zu trennen. Zwischen den beiden Gruppen würde ich einen Wippschalter platzieren, der entweder die Erde oder 3,3 V zu einer Bank oder zur anderen Bank liefert. Dieselben Zugstangen beider Gruppen wären miteinander verbunden (16 'bis 16', 5 1/3 bis 5 1/3 usw.), aber nur diejenige, die die Spannung oder Masse empfängt, würde aktiviert werden.

Das ist eine komplizierte Erklärung für eine einfache Idee. Hier ist ein Link zu einem Schaltplan, den ich gezeichnet habe (kann nicht herausfinden, wie er zum Posten gebracht wird ... Ich bin ein Durcheinander) https://photos.google.com/album/AF1QipM ... HS554mdQWv

Wenn ich mich nicht ernsthaft darüber irre, wie die analogen Deichsel funktionieren, was durchaus möglich ist, sollte dies funktionieren, oder?

-Art

Re: Umschalten zwischen zwei Deichselbänken

von happyfreddy » 27. Jan 2019, 02:15

Hi
Google translation is mostly not the best.
Please post it in english again for better understanding.

There is a diffenrence between drawbars from Hammond C or B or A Series and drawbars of a
Hammond T Series .
When using those from Hammond C etc You must add different resistances between each column of drawbars.
LIne with value " 8 " gets the 3,3 Volt and the line " 0 " is connected to ground.
The sliders are the connecting point to the HX 3 drawbar plug.

Umschalten zwischen zwei Deichselbänken

von art bailey » 27. Jan 2019, 01:00

Schöne Grüße! Ich entschuldige mich im Voraus, wenn diese Google-Übersetzung unangenehm ist. Ich habe ein Set von Hammond Ratschenzügen, die ich mit HX3.5 verwenden möchte. Ich habe hier im Forum viel gesucht, das Wiki gelesen und die Lösung nicht gesehen, die mir am offensichtlichsten erscheint, vielleicht weil sie nicht funktioniert :)

Wenn der Bus mit der 3,3 V einfach zwischen den beiden oberen Deichselbänken geschnitten werden würde, wäre es einfach, einen Kippschalter zu setzen, um die 3,3 V einer der 9er-Bänke zuzuführen. Jede entsprechende Deichsel (1: 1, 2: 2 ... 9: 9) mit dem richtigen Pin auf der Hauptplatine verbunden werden, aber nur die Zugspannung, die aktuell Spannung empfängt, würde das Signal liefern. Bass-Zugstangen müssten eine Ausnahme sein und immer 3,3V erhalten. Entschuldigung, wenn dies schon irgendwo im Detail beschrieben wurde, aber ich kann es einfach nicht finden.

Beste,
Art https://photos.google.com/album/AF1QipM ... HS554mdQWv

Nach oben