Having trouble configuring HX# Plexi module

Antwort erstellen


Diese Frage dient dazu, das automatisierte Versenden von Formularen durch Spam-Bots zu verhindern.
Smileys
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode ist eingeschaltet
[img] ist eingeschaltet
[url] ist eingeschaltet
Smileys sind eingeschaltet

Die letzten Beiträge des Themas
   

Ansicht erweitern Die letzten Beiträge des Themas: Having trouble configuring HX# Plexi module

Re: Having trouble configuring HX# Plexi module

von bovist » 5. Nov 2018, 16:50

Hi Randy,

you may update to 4.25 directly using the HX3 Flash updater. See http://wiki.keyboardpartner.de/index.ph ... pplication for details. This should solve the issues.

Re: Having trouble configuring HX# Plexi module

von randallholmes » 4. Nov 2018, 18:44

It says #3.92 Thanks in advance for your help Just to make everything crystal clear - . I was originally able to adjust parameters. After adjusting most of them I would push and hold the rotary and it would save them as default. I have read and re-read the instructions I am more or less clear on how this unit operates and have successfully paired it to the keyboard I want to use to control it. I was never able to move through the "pre-sets " I am able to step through all of the parameters , I am in preset 0 I can no longer change or adjust any of the parameters. ONly through the parameters I have programmed into the keyboard which are limited. (by adjusting the knobs/switches i have assigned using the NI B4 CC chart) The module is behaving as if I have "locked" it or taken it out of edit mode. Rotary knob has no effect clockwise or counter clockwise . Does respond to pushing to return to preset 0 and holding set to default. Turning knob clockwise will advance it through 2 parameters then return it to preset 0 Buttons operate through parameters forward or backward as described.

Re: Having trouble configuring HX# Plexi module

von Christian » 2. Nov 2018, 12:55

Hi Randy,

what is the HX3 modul you are using? Is it the old Plexi Expander USB based on the 3.4 mainboard or the new one based on the HX3.5 mainboard? What the version number? (Shows up in the display briefly on power-up).

Re: Having trouble configuring HX# Plexi module

von happyfreddy » 1. Nov 2018, 11:37

The handling of rotary knob and buttons is discribed in old mk4 issue
http://wiki.keyboardpartner.de/index.ph ... _MenuPanel

sorry this part of description must be added in User manual of new HX 3.5
We`ll do it next days

This handling is same at new board HX 3.5 but with several parameters now too

So the panel has 3 components for using
1) rotary knob with scrolling by turn right or left
2) rotary Knob with pushing switch for entry in selected part of menue
3) up and down push buttons

Re: Having trouble configuring HX# Plexi module

von randallholmes » 1. Nov 2018, 04:07

Pretty much understand some of the items . New problem Cant seem to edit anything Buttons scroll thru selections rotary knob has no effect. This was not the case at first - was able to program and save to default my preferences. Is there a combination that puts it back in edit mode?
I have the instrument set up using the NIB4 CC set which is working fine - I can control certain parameters via the Kronos . THe parameters are not editable even when midi is disconnected . I need to tweak further a few parameters can anybody help?

Re: Having trouble configuring HX# Plexi module

von happyfreddy » 13. Okt 2018, 14:04

MIDI note on / off on channels 1 - 3 is one thing for HX3 Expander and that MUST RUN.
The second thing are the CC Sets and famous Sets like NI B4 or Hamicord are implemented in HX 3 Expander.

The problem is that some keyboards use different sets or well known sets but within some other controller imlementations
so that perhaps certain thing will not run.

In this case of a Kronos Keyboard You must look how Korg has implemented his CC Set and You have to compare it with the
implemented sets in HX 3. Than choose those one with most identical CC Set controllers with Kronos.
Perhaps some controllers in Kronos are changed to another function - we don´t know this because the Kronos is a relative new keyboard.
When note on/off commands on channel 1 - 3 run You also have the possibility to use the drawbar controller in shop.
With the drawbar controller You haven´t any problems with CC Sets because all buttons You find on the drawbar controller.

For Your problem using channel 3 for special things in Your equipment I have no idea how to make it proper run.
If the Kronos has two Midi Out jacks perhaps route it in another way so that the HX 3 doesn´t get any information on channel 3.

Re: Having trouble configuring HX# Plexi module

von randallholmes » 13. Okt 2018, 03:09

Actually I have done more than read the Kronos Manual I have an assistant who has worked with the developers of this instrument. Its sending out the control changes on channel 3 as I have selected but the HX3 does not respond to note on-off on channel 3,4 5 Again I have selected Midi channel 3 All of the CC's are responding on Channel 3 Note on and off remains at 1 -2 3 upper , lower, probably pedals. I dont know why I have figured out a work around I have not even figured out how you program the drawbars /presets on this module any help from anyone would be appreciated I have studied the manual and at least for me it does not explain clearly how you program the drawbars /presets and if there are CC's for each preset. Pressing the buttons whether up or down only takes it to the next group IE down takes it to vibrato and i believe up takes it to percussion. Sorry if I seem uninformed - would really appreciate some help.

Thanks In advance

Re: Having trouble configuring HX# Plexi module

von happyfreddy » 4. Okt 2018, 10:05

What is in MIDI section possible or not is described in our HX 3 Wiki sites
http://wiki.keyboardpartner.de/index.ph ... ontrollers

Same for Kronos You must read in User manual of that keyboard.

Re: Having trouble configuring HX# Plexi module

von randallholmes » 4. Okt 2018, 02:22

Thanks so much for the reply. I have selected midi channel 3 in the menu . CC's are responding to channel 3 notes only play when channel one is selected on the keyboard. It appears that Kronos can transmit cc's on a different channel than the base channel selected. IE you can assign any control on the Kronos to a different midi channel independent of the main transmitting channel Is there another menu where you can select a midi channel?

Thanks Again
Randy

Re: Having trouble configuring HX# Plexi module

von happyfreddy » 2. Okt 2018, 09:30

Default channels are 1, 2, 3 for NOTE EVENTS
The CC communication runs on Channel 1

For NOTE EVENTS You can change to 3, 4 , 5 ( upper-lower-pedal always one after another channel )
You only have to change channel 1 to channel 3 . The rest will follow .

There is no hidden function

Nach oben