Half-Moon Leslie switch ??

Antwort erstellen


Diese Frage dient dazu, das automatisierte Versenden von Formularen durch Spam-Bots zu verhindern.
Smileys
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode ist eingeschaltet
[img] ist eingeschaltet
[url] ist eingeschaltet
Smileys sind eingeschaltet

Die letzten Beiträge des Themas
   

Ansicht erweitern Die letzten Beiträge des Themas: Half-Moon Leslie switch ??

Re: Half-Moon Leslie switch ??

von zoleeon » 2. Okt 2023, 05:27

HI everyone!

Just for those who are struggling to make a halfmoon switch for HX3.5 as I was...you need a double 3 way guitar switch, you have the schematic here in this topic, posted by Happyfredy and the one more information that in my case was missing it is that you have to enable latching mode in the editor, activate bit 0 in parameter #1502(thanks for this information to Christian from keyboardpartner)...mine was not activated by default, it was in a kind of toggle mode that is why I got the chaotic changes with the switch.

Hope that this will help others in my situation.

All the best!

Re: Half-Moon Leslie switch ??

von zoleeon » 25. Sep 2023, 05:14

In the editor I found something leslie related
editor 1.jpg
(368.84 KiB) 55-mal heruntergeladen
editor 2.jpg
(363.15 KiB) 52-mal heruntergeladen
but there seems to be defined as switches...

this editor is huge....sorry, It is easy to get lost in it...

Re: Half-Moon Leslie switch ??

von zoleeon » 25. Sep 2023, 05:00

happyfreddy hat geschrieben: 24. Sep 2023, 19:58 HI

In this case the switches of Leslie are defined as
PUSH BUTTONS
They must be defined as real SWITCHES

Hi!

This is good news for me. I could not find this settings in the unit itself. Where can I change this leslie related setup?

Thank you!

Re: Half-Moon Leslie switch ??

von happyfreddy » 24. Sep 2023, 19:58

HI

In this case the switches of Leslie are defined as
PUSH BUTTONS
They must be defined as real SWITCHES

Re: Half-Moon Leslie switch ??

von zoleeon » 24. Sep 2023, 17:32

To understand this halfmoon switch thing for HX3:

T, R, S not connected is STOP
R connected to the ground or sleeve is RUN(slow)
so I inserted a TRS cable in the footswitch input of the HX3 and shorted the ground to the ring and indeed the rotary start to run...but when I released it , no connection between T, R, S it was still in the run mode, and only when I did connect the ring to sleeve again, than stopped...maybe I have to do some global setup to my unit to listen to no connection between T, R, S?

and than kind of same with FAST

T. R, S connected is Fast, right?

so I connected the tip ring and sleeve, and rotary started run fast, than release the connections, tip ring and sleeve no connection between each other and the unit remained on Fast....what I am doing wrong? Or is my unit faulty?

If someone can help, please do so. Thank you in advance!

Re: Half-Moon Leslie switch ??

von happyfreddy » 24. Sep 2023, 13:14

hi,

first chose is left switch half for the function of RING :
Connect pin 1 and 3 together. solder them to the RING
Pin 4 is soldered to GND = shaft

second chose is right switch half for function of PIN

solder pin 5 to GND = shaft

either pin 6 or 8 soldered to PIN

Mount the switch in that way that the slow function is at left side when switched
If not just turn the switch or solder the pin to the other pin 6 or 8.

Re: Half-Moon Leslie switch ??

von zoleeon » 24. Sep 2023, 06:26

Hi everyone!

Last year could not make a rotary control switch, probably to much soldering ruined my switch and gave up and I programmed the modwheel to do the slow-fast change ....But I'll try again...so please check the 3 way switch photo attached and let me know if it will do the job.
3 way switch.jpg
(80.17 KiB) 35-mal heruntergeladen
If the answer is yes, tell me where to solder the ground, ring and tip of the TRS jack.

If the answer is no, what kind of switch do you recommend?


Many thanks!

Re: Half-Moon Leslie switch ??

von Hervshahn » 25. Aug 2023, 20:34

Hervshahn hat geschrieben: 10. Apr 2023, 16:08 Hi,

is there a way to make a Hammond CU-1 work with the HX3, and what must be done/modified for this?
Hi, this is still an open question for which I am looking to get an answer, anybody who managed to have a Hammond CU-1 working with the HX3, and which modifications are needed, if any?

Re: Half-Moon Leslie switch ??

von Hervshahn » 10. Apr 2023, 16:08

Hi,

is there a way to make a Hammond CU-1 work with the HX3, and what must be done/modified for this?

Re: Half-Moon Leslie switch ??

von happyfreddy » 11. Nov 2022, 13:51

If chaotish results when switching You have made
wrong connection.
Use a resistance meter to control which pin has which function.
When resistance zero the contact is closed.
Mark them or write it down on paper before installing and connecting it to jack.

At my switch You can see the interior through pcb board so ist was easy to verify the
pins and their function.

Nach oben